Microstructural and Elemental Characterization of Aluminium Alloy A356/Cow Horn Particle Composite Using SEM and EDX Techniques

Sunday Chimezie Anyaora; Stephen A. Takim; Madubueze Sunday Ofochebe; Paul Tochukwu Agu

doi:10.59890/ijsr.v3i5.165

Authors

Sunday Chimezie Anyaora Department of Mechanical Engineering, Faculty of Engineering in Nnamdi Azikiwe University, Awka, Anambra State
Stephen A. Takim Department of Mechanical Engineering, University of Cross River State, Unicross Calabar, Cross River State
Madubueze Sunday Ofochebe Department of Mechanical Engineering, Faculty of Engineering in Nnamdi Azikiwe University, Awka, Anambra State
Paul Tochukwu Agu Department of Mechanical Engineering, Faculty of Engineering in Nnamdi Azikiwe University, Awka, Anambra State

DOI:

https://doi.org/10.59890/ijsr.v3i5.165

Keywords:

Aluminium Alloy A356, Cow Horn Particulates, Microstructure, SEM, EDX

Abstract

Research into substitute reinforcements for metal matrix composites has increased due to the engineering and automotive sectors' increasing need for lightweight, strong, and reasonably priced materials. Despite their effectiveness, conventional reinforcements like silicon carbide and alumina are costly and harmful to the environment. To examine the machining behavior of aluminum alloy A356 reinforced with cow horn particles (0–20%), the study used an experimental methodology. To guarantee structural integrity, spark plasma sintering was used to create the composites at 550°C and 30 MPa under vacuum. Using HSS and HCS tools, machining experiments were carried out on a Universal Turning Machining Center. Response Surface Methodology was used to improve parameters such as cutting speed, feed rate, and depth of cut. Using a Phenom ProX model, scanning electron microscopy (SEM) was used to analyze surface morphology, and energy dispersive X-ray spectroscopy (EDX) was used to characterize the ideal composite sample's elements and composition. Scanning Electron Microscope (SEM) results revealed reduced wear in CHp composites, as larger particles improved interfacial bonding, toughness, and resistance to plastic deformation compared to the unreinforced alloy. The study demonstrates that CHp reinforcement offers an eco-friendly and economical approach to enhancing the performance of aluminum alloys for industrial applications.

References

Atuanya, C. U., & Aigbodion, V. S. (2014). Evaluation of Al–Cu–Mg alloy/bean pod ash nanoparticles synthesis by double-layer feeding–stir casting method. Journal of alloys and compounds, 601, 251-259.

Kumar, A., Singh, V. P., Singh, R. C., Chaudhary, R., Kumar, D., & Mourad, A. H. I. (2024). A review of aluminum metal matrix composites: fabrication route, reinforcements, microstructural, mechanical, and corrosion properties. Journal of Materials Science, 59(7), 2644-2711.

Kumar, M. S. (2023). Utilizing bio-waste as the reinforcement particles for the production of sustainable composite brakes and the investigation of their tribological and corrosive performance. Environmental Science and Pollution Research, 30(3), 6935-6949.

Le, X. B., & Choa, S. H. (2024). Assessment of the Risk of Crack Formation at a Hybrid Bonding Interface Using Numerical Analysis. Micromachines, 15(11), 1332.

Nwobi-Okoye, C. C., & Ochieze, B. Q. (2018). Age hardening process modeling and optimization of aluminum alloy A356/Cow horn particulate composite for brake drum application using RSM, ANN, and simulated annealing. Defence Technology, 14(4), 336-345.

Nwobi-Okoye, C. C., Ochieze, B. Q., & Okiy, S. (2019). Multi-objective optimization and modeling of age hardening process using ANN, ANFIS, and genetic algorithm: Results from aluminum alloy A356/cow horn particulate composite. Journal of Materials Research and Technology, 8(3), 3054-3075.

Ochieze, B. Q., Nwobi-Okoye, C. C., & Atamuo, P. N. (2018). Experimental study of the effect of wear parameters on the wear behavior of A356 alloy/cow horn particulate composites. Defence technology, 14(1), 77-82.

Oguntuase, M., Adeyemi, G. J., & Stephen, J. T. (2022). Effects of Cow Horn Particulates as Addictive on Microstructure, Tensile, and Compressive Properties of Recycled Aluminium Alloy. European Journal of Engineering and Technology Research, 7(2), 146-152.

Oladele, I. O., Falana, S. O., Akinbamiyorin, M., Onuh, L. N., Taiwo, A. S., Adelani, S. O., & Olajesu, O. F. (2025). Cyclic thermal treatment parameters of bagasse particle reinforced epoxy bio-composites for sustainable applications. Discover Polymers, 2(1), 1-22.

Pu, C., Gao, X., Wu, Z., Du, Z., & Jing, Z. (2025). Metal‐silicate partitioning of Si, O, and Mg at high pressures and high temperatures: Implications to the compositional evolution of core‐forming metallic melts. Geochemistry, Geophysics, Geosystems, 26(2), e2024GC011940.

Rajan, T. P. D., Pillai, R. M., Pai, B. C., Satyanarayana, K. G., & Rohatgi, P. K. (2007). Fabrication and characterisation of Al–7Si–0.35 Mg/fly ash metal matrix composites processed by different stir casting routes. Composites Science and Technology, 67(15-16), 3369-3377.

Rong, X., Zhao, D., He, C., & Zhao, N. (2024). recent progress in aluminum matrix composites reinforced by in situ oxide ceramics. Journal of Materials Science, 59(22), 9657-9684.

Wang, F., Li, J., Shi, C., Liu, E., He, C., & Zhao, N. (2019). Orientation relationships and interface structure in MgAl2O4 and MgAlB4 Co-reinforced Al matrix composites. ACS Applied Materials & Interfaces, 11(45), 42790-42800.

Zhang, M., Tian, Y., Zheng, X., Zhang, Y., Chen, L., & Wang, J. (2023). Research progress on multi-component alloying and heat treatment of high strength and toughness Al–Si–Cu–Mg cast aluminum alloys. Materials, 16(3), 1065.